16Bay
The 3U16-bay 6G hot-swap JBOD is ideal for high-availability storage and high performance appliance. This enclosure supports two 6G expander modules for redundancy and 16x 6G ( backplane support ) SAS/SATA hard disk bays.
- 16 x 6G SAS/SATA hard disk bays
- 2 x hot-swap fans
- Hot-swap 500W 12V high-efficiency redundant
- power supply
- 3 x 24Gb/s Mini SAS ports with single expander
- 6 x 24Gb/s Mini SAS ports with dual expanders
- Serial port for console monitoring
- Short depth design
型錄下載
General
Number of Expander:Single / Dual
Expander Chip:LSISA2 x 36
Host Interface:Mini SAS connector
Expansion Interface:Mini SAS connector
Drives Supported
Drive Interface : 3.0 / 6.0 Gb dual ported SAS , 3.0 / 6.0 Gb single ported SATA
Drive RPM : Up to 15,000
Form Factor : 3.5”, 1”height
Administration / Management
Admin / Firmware Upgrade : Serial port via Hyperterminal
LED Indicators : Yes
Hot-swap and Redundancy
Disk Drive : Hot-swap 16-bay
Cooling : 2 x 8038 hot-swap fans
Power Supply : 500W 1 + 1 hot-swap redundant 80+ (Silver)
Power Entry : Dual AC Inlet
Electrical and Environmental
Universal A/C Input : 100~240 V AC full range
Operating Environment : Temperature 0℃ to 35℃ / Relative humidity 20% to 80%
Non-operating Environment : Temperature -20℃ to 60℃ / Relative humidity 10% to 90%
Physical Specification
Dimensions ( W x D x H ) : 482.6 x 533.2 x 132.5 mm ( with chassis ears )
Gross Weight : 21 kgs / 46.3 lbs (with packaging
Mounting Option : Adjust plate or 20”tool-less rail ( optional )